LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (Electronic Control Modules) >> Powertrain Control Module >> Standard Procedure >> Standard Procedure - Obtaining Diagnostic Trouble Codes >> Obtaining DTC'S Using Scan Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Obtaining DTC'S Using Scan Tool

WARNING: This page is about a different car, the 2005 Dodge Grand Caravan, 2005 Dodge Caravan, and 2005 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the scan tool to the data link (diagnostic) connector. This connector is located in the passenger compartment; at the lower edge of instrument panel; near the steering column.
  2. Turn the ignition switch on and access the "Read Fault" screen.
  3. Record all the DTC's and "freeze frame" information shown on the scan tool.
  4. To erase DTC's, use the "Erase Trouble Code" data screen on the scan tool. Do not erase any DTC's until problems have been investigated and repairs have been performed. 
scientia non olet · About LEMON Manuals