LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> 300 Base, 42RLE/VLP >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module-Engine Control >> Standard Procedure >> Standard Procedure - ECM/Skim Programming - Diesel >> PROGRAMMING THE ECM (Bosch)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

PROGRAMMING THE ECM (Bosch)

  1. To program the VIN, connect the scan tool and turn the ignition on.
  2. Select Engine from the main menu. The scan tool will require the VIN to be entered before continuing.
  3. Select ENTER to update the VIN. The scan tool will display the updated VIN.
  4. If the engine is equipped with air conditioning, the ECM A/C function must be enabled. Enable the ECM A/C function as follows:
    • Using the scan tool select ENGINE, MISCELLANEOUS, then ENABLE/DISABLE A/C
    • Push 1 to enable A/C, the scan tool screen should display A/C Activated.
scientia non olet · About LEMON Manuals