LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Electronic Control Modules) >> Engine Control Module >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Engine Control Module: Installation

WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: THE ECM MUST BE PROGRAMMED TO SUPPORT THE VEHICLE OPTIONS PACKAGE.
  1. Position the ECM into the guide of the retaining bracket. See Figure.
  2. Carefully push the ECM in to the bracket until the bracket tensioning springs engage. See Figure.
  3. Connect the ECM wiring harness connectors. See Figure.
  4. Connect negative battery cable.
scientia non olet · About LEMON Manuals