LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Fuel System) >> Fuel Injection >> Accelerator Pedal Position Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Accelerator Pedal Position Sensor: Installation

WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: ACCELERATOR PEDAL POSITION SENSOR
GC0037159Courtesy of DAIMLERCHRYSLER CORP.
1 - APP SENSOR
2 - ACCELERATOR PEDAL
3 - BRAKE PEDAL
  1. Connect the accelerator pedal position sensor wiring harness connector.
  2. Position the sensor and install the fasteners. See Fig 1.
  3. Connect the negative battery cable.
scientia non olet · About LEMON Manuals