LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Restraints System (Service Information) >> Driver Airbag Cover >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Driver Airbag Cover: Installation

Fig 1: Securing Driver Airbag Cover Latch Hooks
GC0023000Courtesy of DAIMLERCHRYSLER CORP.
  1. Place driver airbag into new driver airbag cover.
    WARNING: Be careful not to pinch airbag cushion between latch hook mounting plate and cover.
  2. Push down on the latch hook mounting plate and guide the latch hooks into the slots on the driver airbag cover.
  3. Once all the latch hooks have been started, pull the driver airbag cover away from the driver airbag to fully seat the latch hooks.
  4. Install the driver airbag (Refer to ELECTRICAL/RESTRAINTS/DRIVER AIRBAG - INSTALLATION) .
WARNING: Do not connect the battery negative cable (Refer to ELECTRICAL/RESTRAINTS - DIAGNOSIS AND TESTING - AIRBAG SYSTEM)  . Personal injury or death may result if the system test is not performed first.
scientia non olet · About LEMON Manuals