LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> Muffler/Pipe Assembly >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Muffler/Pipe Assembly: Installation

NOTE: Always work from the front to rear of exhaust system when aligning and tightening exhaust system components.
  1. Loosely install muffler/pipe assembly onto resonator pipe.
  2. Install support isolators to muffler supports.
  3. Align muffler/pipe assembly to maintain position and proper clearance with underbody parts. All support isolators should have equal load on them. Tighten band clamp to 54 N.m (40 ft. lbs.).
  4. Connect ground strap to muffler.
  5. Lower vehicle.
  6. Start the engine and inspect for exhaust leaks. Repair exhaust leaks as necessary.
  7. Check the exhaust system for contact with the body panels. Make the necessary adjustments, if needed.
scientia non olet · About LEMON Manuals