Engine Coolant Temperature Sensor: Removal

WARNING: This page is about a different car, the 2006 Dodge Viper. However, it is still accessible from the selected car via links, so may be relevant.

Partially drain the cooling system.
Disconnect the electrical connector from the engine coolant temperature sensor.
Remove the sensor. See Fig 1.

Fig 1: Engine Coolant Temperature (ECT) Sensor

Courtesy of DAIMLERCHRYSLER CORP.

1 - ENGINE COOLANT TEMPERATURE (ECT) SENSOR

2 - COOLING SYSTEM BLEED SCREW

3 - CAMSHAFT POSITION SENSOR