LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Fuel System) >> Fuel Injection >> O2 Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

O2 Sensor: Installation

WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the oxygen sensor. See Figure.
  2. Install the heatshield and tighten fasteners to 9N.m (80 lbs. in.). See Figure.
  3. Properly position the oxygen sensor wiring harness and connect the electrical connector. See Figure.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals