O2 Sensor: Removal

WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the exhaust heat shield. See Fig 1.
Disconnect the O2 sensor harness connector. See Fig 1.
Remove the O2 sensor. See Fig 2.

Fig 1: HEAT SHIELD

Courtesy of DAIMLERCHRYSLER CORP.

1 - FASTENERS

2 - SHIELD

3 - O2 SENSOR HARNESS CONNECTOR

Fig 2: OXYGEN SENSOR

Courtesy of DAIMLERCHRYSLER CORP.

1 - OXYGEN SENSOR