LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Electronic Control Modules (Service Information)) >> Power Top Control Module >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Top Control Module: Installation

WARNING: This page is about a different car, the 2006 Chrysler Crossfire. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Power Top Control Module
GC0035013Courtesy of DAIMLERCHRYSLER CORP.
  1. Install the power top control module to the hydraulic pump bracket (4).
  2. Install the power top control module retaining screw (1).
  3. Connect the power top control module harness connectors (2) and (3).
    Fig 2: Identifying Left Trunk Trim Panel & Plastic Retainers
    GC0035014Courtesy of DAIMLERCHRYSLER CORP.
  4. Install the trunk interior trim panel (1).
  5. Install the plastic panel retainers (2).
  6. Connect the negative battery cable.
  7. Perform the Standard Procedure to complete the installation and programing of the new power top control module. (Refer to ELECTRICAL/ELECTRONIC CONTROL MODULES/POWER TOP CONTROL MODULE - STANDARD PROCEDURE) 
scientia non olet · About LEMON Manuals