LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Electronic Control Modules (Service Information)) >> Security System Module >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Security System Module: Installation

WARNING: This page is about a different car, the 2006 Chrysler Crossfire. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Electrical Harness, Air Lines & Central Locking Pump/Security System Module
GC0035001Courtesy of DAIMLERCHRYSLER CORP.
  1. Install the central locking pump/security system module (3) into the trunk and connect the air lines (2) and the electrical harness (1).
  2. Install the central locking pump/security system module into sound deadening foam covering and slide it back into place.
    Fig 2: Identifying Interior Trim Panels And Floor Covering
    GC0035005Courtesy of DAIMLERCHRYSLER CORP.
  3. Install the right half of the trunk floor covering (3).
  4. Install the rear interior trim panel (2).
  5. Install the right side interior trim panel (4).
  6. Install the right upper trim panel (1).
  7. Install the trunk floor carpet.
  8. Connect the negative battery cable.
scientia non olet · About LEMON Manuals