Anti-Theft System
WARNING: This page is about a different car, the 2006 Chrysler Crossfire. However, it is still accessible from the selected car via links, so may be relevant.
Once the anti-theft alarm system is set, the anti-theft alarm can be triggered if:
- The Doors, Hood, or Liftgate/Decklid is opened
- The Radio is removed (disconnected electrically)
- The Ignition is jumped
- The Glove Box is opened
- The Anti-theft Tow Sensor is tripped
- The Alarm Siren is tripped
The inputs ready for triggering an alarm are checked twice per second by the CLP/SSM. If two sequential checks of the same input indicate that the input is not in the non-actuated state, the audible alarm Siren is triggered and the front and rear lamps flash.