Security System Module: Removal
WARNING: This page is about a different car, the 2006 Chrysler Crossfire. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable.
- Remove the trunk floor carpet.
- Remove the right side interior trim panel (4).
- Remove the upper right roof trim panel (1).
- Remove the rear interior trim panel (2).
- Remove the right half of the floor covering (3).
- Remove the sound deadening foam material from the central locking pump/security system module.
- Disconnect the air lines (2) and the electrical harness (1) from the central locking pump/security system module (3) and remove the module.