LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Fuel System) >> Fuel Delivery >> Fuel Level Sending Unit / Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Level Sending Unit / Sensor: Installation

WARNING: This page is about a different car, the 2006 Chrysler Crossfire. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the fuel level sending unit/sensor into the fuel tank.
  2. Install Special Tool 9240 and rotate the fuel level sending unit/sensor clockwise fully to stop. Remove the Special Tool.
  3. Connect the fuel level sending unit/sensor harness connector.
  4. Install the fuel tank partition into the cargo area and install the retaining bolts. Tighten the retaining bolts to 10 N.m (7 ft. lbs.).
  5. Install the cargo area interior trim panels.
  6. Refill the fuel tank to the prior level.
  7. Connect the negative battery cable.
scientia non olet · About LEMON Manuals