Accelerator Pedal: Removal: Notes

WARNING: This page is about a different car, the 2006 Chrysler Crossfire. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Accelerator Pedal-To-Floor Nut

Courtesy of DAIMLERCHRYSLER CORP.

Disconnect the negative battery cable.
Remove the lower accelerator nut cover (1) and the nut.

Fig 2: Identifying Nut
Courtesy of DAIMLERCHRYSLER CORP.
Lift the accelerator pedal off of the welded stud and out of the bracket (1).
Disconnect the accelerator pedal harness connector from the accelerator pedal.