Map Sensor: Installation: Notes

WARNING: This page is about a different car, the 2006 Chrysler Crossfire. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Manifold Absolute Presure Sensor

Courtesy of DAIMLERCHRYSLER CORP.

Install the MAP sensor.
Install the bolt (1).
Connect the Manifold Absolute Pressure (MAP) harness connector.
Install the engine cover. Align the engine cover retaining clips to the rubber mounts, and push down firmly to connect engine cover to rubber mounts.
NOTE: To ease the installation of the engine cover, apply a small amount of lubricant to the engine cover rubber mounts.
Connect the negative battery cable.