On / Off Switch Indicator Module: Operation
WARNING: This page is about a different car, the 2006 Chrysler Crossfire. However, it is still accessible from the selected car via links, so may be relevant.
The passenger seat occupant simulator receives a multiplexed DC voltage signal from the passenger airbag on/off switch. The signal is then converted into a digital signal and sent to the occupant restraint controller.
With the passenger airbag On/Off switch in the OFF position, the occupant restraint controller provides a ground for the Passenger Air Bag Off indicator, and disables the passenger airbag.
With the passenger airbag On/Off switch in the ON position, the occupant restraint controller allows full operation of the passenger airbag.