Control Circuit Testing
WARNING: This page is about a different car, the 2006 Chrysler Crossfire. However, it is still accessible from the selected car via links, so may be relevant.
The starter control circuit components should be tested in the order in which they are listed, as follows:
- Starter Solenoid - Refer to Starter Motor for the procedures. (Refer to ELECTRICAL/STARTING/STARTER MOTOR - DIAGNOSIS AND TESTING) .
- Ignition Switch - Refer to Ignition Switch and Key Lock Cylinder for the procedures. ( Refer to IGNITION SYSTEM - ELECTRICAL DIAGNOSTICS ) .
- Wire harnesses and connections - Refer to SYSTEM WIRING DIAGRAMS for complete circuit diagrams. (Refer to ELECTRICAL/WIRING DIAGRAM INFORMATION - DESCRIPTION) .