April 5, 2026: LEMON Manuals is launched! Read the announcement.

Section 2 - Additional Pcm / TCM Replacement Procedures

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

STEPS-BY-STEP INSTRUCTIONS

Check PCM Odometer

From the "Home" screen, select "ECU View".

Select "PCM"
Select "Misc. Functions"
Select "Check PCM Odometer" and follow the on screen instructions.
When complete, select "Finish".

Check PCM VIN

From the "Home" screen, select "ECU View"

Select "PCM"
Select "Misc. Functions"
Select "Check PCM VIN" and follow the on screen instructions.
When complete, select "Finish"

Initialize CVT

From the "Home" screen, select "ECU View"

Select "TCM"
Select "Misc. Functions"
Select "Initialize CVT" and follow the on screen instructions.
When complete, select "Finish"

Initialize EGS

From the "Home" screen, select "ECU View"

Select "TCM"
Select "Misc. Functions"
Select "Initialize EGS" and follow the on screen instructions.
When complete, select "Finish"

Learn ETC

From the "Home" screen, select "ECU View"

Select "PCM"
Select "Misc. Functions"
Select "Learn ETC" and follow the on screen instructions.
When complete, select "Finish"

PCM Replaced

The vehicle pin (Personal Identification Number) will be required to complete the routine. This information may be obtained in three ways:

The original selling invoice
DealerCONNECT > Parts > Key Codes
Contacting the District Manager.

From the "Home" screen, select "ECU View"

Select "WCM"
Select "Misc. Functions"
Select "PCM Replaced" and follow the on screen instructions.
When complete, select "Finish"

Quicklearn

From the "Home" screen, select "ECU View"

Select "PCM"
Select "Misc. Functions"
Select "Quicklearn" and follow the on screen instructions.
When complete, select "Finish"

Update CVT TCM

From the "Home" screen:

Select "ECU View"
Select "TCM"
Select "More Options"
Select "ECU Flash"
Select "Browse for New File" and follow the on screen instructions.
Highlight the appropriate calibration.
Select "Download to Scantool"
Once the download is complete, select "Close" and then "Back"
Highlight the listed calibration, select "Update Controller" and follow the on screen instructions.
When the TCM update is complete, select "OK"
Verify that the part number at the top of the "Flash TCM" screen has updated to the latest level.

If a NGC3 or NGC4 PCM was replaced, perform the following additional steps and/or routines:

PCM Replaced - if WCM equipped
Learn ETC - if ETC equipped
Check PCM Odometer
Check PCM VIN - if NOT WCM equipped
Quicklearn - if EATX equipped
If a GPEC PCM was replaced, perform the following additional steps and/or routines:
If the vehicle is equipped with a CVT, ensure that the TCM has the latest software calibration available (if the vehicle is not equipped with a CVT, skip to Step 3).
PCM Replaced - if WCM equipped
Learn ETC
Check PCM Odometer
Check PCM VIN - if NOT WCM equipped
TCM Quicklearn - if EATX equipped
If a CVT TCM was replaced, perform the following additional steps and/or routines:
Initialize CVT
If an EGS TCM was replaced, perform the following additional steps and/or routines:
Initialize EGS