Key Cylinder

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Access Hole For Lock Cylinder Removal

Courtesy of CHRYSLER LLC

NOTE: SCCM and SKREEM/WCM previously removed.

Insert the key (2) and turn the key cylinder (3) to the RUN position.
Insert an appropriate tool into the slot (1) formed into the lock cylinder housing depressing the key cylinder retaining tab.
Pull the key cylinder and key straight out of the lock cylinder housing as one unit.