Steering Control Module: Assembly

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Jumper Wire Harness Connector, Right Multi-Function Switch & Clockspring

Courtesy of CHRYSLER LLC

Connect the right stalk electrical connector.

Fig 2: Identifying Right Multi-Function Switch Retaining Screw
Courtesy of CHRYSLER LLC
Slide the right stalk into the groove and install the one retaining screw.

Fig 3: Identifying Left Stalk Electrical Connector
Courtesy of CHRYSLER LLC
Connect the left stalk switch electrical connector.

Fig 4: Identifying Left Stalk Retaining Screw
Courtesy of CHRYSLER LLC
Install the left stalk switch retaining screw.