Speed Control Servo - 2.4L Turbo

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Cable Retaining Clip

Courtesy of CHRYSLER LLC

1 - HAIRPIN CLIP

Install the retaining clip holding cable to servo.

Fig 2: Servo Vacuum & Electrical Connections
Courtesy of CHRYSLER LLC

1 - Electrical Connector

2 - Vacuum Line and Nipple
Install the vacuum line to the speed control servo.
Connect and lock the electrical connector to the speed control servo.

Fig 3: Speed Control Servo - 2.4L Turbo
Courtesy of CHRYSLER LLC
Install the speed control servo to the mounting bracket.
Install the 2 nuts from the speed control servo studs.

Fig 4: Throttle Control Shield - 2.4L Turbo
Courtesy of CHRYSLER LLC
Install the throttle control shield.

Fig 5: Identifying Battery Negative Cable
Courtesy of CHRYSLER LLC
Connect the negative battery cable.