LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2007 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 203 (Fuel System) >> Fuel Injection >> Cable-Throttle Control >> Installation >> Throttle Cable
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Throttle Cable

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. From the engine compartment, push the housing end fitting and grommet into the dash panel. Install grommet into the dash panel.
  2. Install the cable housing (throttle body end) into the cable mounting bracket on the engine.
  3. From inside the vehicle, hold up the pedal and install throttle cable and cable retainer in the upper end of the pedal shaft.
  4. At the dash panel, install the cable retainer clip between the end of the throttle cable fitting and grommet
  5. From the engine compartment, rotate the throttle lever wide open and install the throttle cable.
scientia non olet · About LEMON Manuals