LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2007 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Electronic Control Modules (Service Information)) >> Module-Engine Control >> Standard Procedure >> Standard Procedure - ECM/Skim Programming - Diesel >> ECM/Skim Programming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ECM/Skim Programming

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

When a ECM and the SKIM are replaced at the same time perform the following steps in order:

  1. Program the new ECM.
  2. Program the new SKIM.
  3. Replace all ignition keys and program them to the new SKIM.

    When an ECM and the SKIM are replaced at the same time perform the following steps in order:

  4. Program the new SKIM.
  5. Program the new ECM.
scientia non olet · About LEMON Manuals