LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2007 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Fuel System) >> Fuel Injection (Except Diesel) >> O2 Sensor >> Removal >> 2.4L Turbo/2.4L SRT-4
April 5, 2026: LEMON Manuals is launched! Read the announcement.

2.4L Turbo/2.4L SRT-4

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Upstream O2 Sensor- 2.4L Turbo
GC0019486Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect the negative battery cable.
  2. Unlock and disconnect the electrical connector. It is on the passenger side near the EVAP purge solenoid.
  3. Raise vehicle and support.
  4. Remove sensor using an oxygen sensor crow foot wrench such as Snap-On tool YA8875 or equivalent
scientia non olet · About LEMON Manuals