Sensor-Variable Line Pressure: Removal

Fig 1: Identifying Variable Line Pressure Sensor & Pressure Control Solenoid

Courtesy of CHRYSLER LLC

1 - PRESSURE CONTROL SOLENOID

2 - LINE PRESSURE SENSOR

3 - SHOULDER SCREW

4 - VARIABLE LINE PRESSURE HEADER

5 - MANUAL SHAFT

6 - SCREWS

Remove the valve body from the transmission. See REMOVAL .
Remove the electrical connectors from the pressure control solenoid (1) and the line pressure sensor (2). See Fig 1.
Remove the screws (6) holding the pressure control solenoid (1) and line pressure sensor (2) to the valve body.
Remove the pressure control solenoid and line pressure sensor from the valve body.