LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2007 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Electronic Control Modules - Service Information >> Body Control Module >> Removal >> Body Control Module - RHD
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Body Control Module - RHD

Fig 1: Identifying Control Modules & Components
GC0034988Courtesy of CHRYSLER LLC
  1. Disconnect the negative battery cable.
  2. Slide the clips forward to remove the plastic control module box cover (1).
  3. Holding the metal body control module retaining clip back, pull the body control module (6) up and out of the control module box (5).
  4. Disconnect the BCM harness connectors by first sliding the grey motor harness wiper connector lock to the right and disconnecting the windshield wiper harness connector. Then, pull the metal body control module connector lock up to unlock and disconnect the rest of the body control module harness connectors.
scientia non olet · About LEMON Manuals