Coolant Level Sensor-Removal-3.0L-Diesel
WARNING: This page is about a different car, the 2007 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - COOLANT LEVEL SENSOR |
| 2 - COOLANT RESERVOIR |
| 3 - ELECTRICAL CONNECTOR |
NOTE:
Drain coolant from radiator drain plug only.
- Drain coolant until the coolant recovery container is emptied. See STANDARD PROCEDURE .
- Disconnect the wiring harness electrical connector.
- Turn the level sensor (1) 90 degrees clockwise, lift up and out of the container.