LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2007 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Speed Control) >> Speed Control >> Switch >> Installation >> Speed Control Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Speed Control Switch

WARNING: This page is about a different car, the 2007 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.

The speed control switch is mounted to the back of the multi-function switch.

  1. Position speed control switch to back of multi-function switch.
  2. Install switch mounting screw. Refer to TORQUE SPECIFICATIONS  .

    Install multi-function switch.

  3. Plug pigtail electrical connector into instrument panel wiring harness. Be sure wires are not pinched.
  4. Install negative battery cable to battery.
scientia non olet · About LEMON Manuals