LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2007 >> Crossfire V6-3.2L VIN L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Camshaft Position Sensor >> Service and Repair >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal






REMOVAL





1. Disconnect the negative battery cable.

2. Disconnect the camshaft position sensor harness connector (1).

3. Remove the retaining bolt (2).

4. Remove the camshaft position sensor from the cylinder head.
scientia non olet · About LEMON Manuals