Diagnostic Test

1) MILEAGE NOT PROGRAMMED IN THE POWERTRAIN CONTROL MODULE (PCM)
Turn the ignition on.

With a scan tool, Clear DTCs.

Using the scan tool, program the vehicle mileage into the Powertrain Control Module (PCM).

Start the engine and allow it to reach normal operating temperature.

With a scan tool, select View DTCs.

Is the status Active for this DTC?

Yes
1. Replace and program the Powertrain Control Module (PCM) in accordance with the Service Information.
2. Perform PCM VERIFICATION TEST .
No
1. Test complete.
2. Perform PCM VERIFICATION TEST .