Integrated Control Unit

Fig 1: Locating ICU Mounting Bolt

Courtesy of CHRYSLER LLC

1 - ICU

2 - MOUNTING BOLT

3 - MOUNTING BRACKET

If the mounting bracket (3) needs to be removed from the ICU, remove the single mounting bolt (2), then slide the ICU's mounting pins out of the grommets in the bracket and remove the bracket.

Fig 2: Locating ICU Mounting Pins
Courtesy of CHRYSLER LLC
Remove the mounting pins from the ICU.

Fig 3: ABM Mounting Screws - Without Traction Control
Courtesy of CHRYSLER LLC

1 - MOUNTING SCREWS

2 - ABM
If not equipped with ESP® or traction control, remove the three screws (1) attaching the ABM (2) to the HCU.

Fig 4: ABM Mounting Screws - With Traction Control
Courtesy of CHRYSLER LLC

1 - MOUNTING SCREWS

2 - ABM
If equipped with ESP® or traction control, remove the four screws (1) attaching the ABM (2) to the HCU.

Fig 5: ABM Assembly To HCU
Courtesy of CHRYSLER LLC

1 - ABM

2 - HCU

3 - SOLENOID VALVE STEM
Separate the ABM (1) from the HCU (2).