Specifications Index
SEBRING SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | A/C SYSTEM | ||
| Torque | TORQUE | ||
| Axle Nut/Hub Nut | |||
| Front | 118 Ft. Lbs. (160 N.m) | ||
| Rear | 181 Ft. Lbs. (245 N.m) | ||
| Battery | BATTERY SYSTEM | ||
| Brakes | |||
| Bleeding Sequence | |||
| With ABS | ANTILOCK BRAKE SYSTEM BLEEDING | ||
| Without ABS | BASE BRAKE BLEEDING | ||
| Disc Brakes | SPECIFICATIONS | ||
| Drum Brakes | DIAGNOSIS AND TESTING | ||
| Torque | BRAKE FASTENER TORQUE | ||
| Charging | |||
| Generator | GENERATOR RATINGS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Drive Belts | |||
| Adjustment | ACCESSORY DRIVE BELT TENSION | ||
| Belt Routing | |||
| 2.0L/2.4L | INSTALLATION-2.0/2.4L ENGINE | ||
| 2.7L | INSTALLATION-2.7L | ||
| 3.5L | INSTALLATION-3.5L | ||
| Engine Cooling | |||
| General Service Specifications | FILL VOLUMES | ||
| Radiator Cap Pressure | 14-18 psi | ||
| Thermostat R & I | THERMOSTAT-ENGINE COOLANT | ||
| Water Pump R & I | PUMP-WATER | ||
| Engine Mechanical | |||
| 2.4L | |||
| Compression | CYLINDER COMPRESSION PRESSURE TEST | ||
| Oil Pressure | 4 psi at idle, 25-80 at 3000 RPM | ||
| Overhaul | 2.4L - SERVICE INFORMATION | ||
| Torque | TORQUE | ||
| 2.7L | |||
| Compression | CYLINDER COMPRESSION PRESSURE TEST | ||
| Oil Pressure | 5 psi at idle, 45-105 psi at 3000 RPM | ||
| Overhaul | 2.7L DOHC - SERVICE INFORMATION | ||
| Torque | TORQUE SPECIFICATIONS | ||
| 3.5L | |||
| Compression | CYLINDER COMPRESSION PRESSURE TEST | ||
| Oil Pressure | 5 psi at idle, 45-105 psi at 3000 RPM | ||
| Overhaul | 3.5L - SERVICE INFORMATION | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Drive Plate/Flex Plate Torque | 70 Ft. Lbs. (95 N.m) | ||
| Fuel System | |||
| Fuel Filter Location | FUEL PUMP MODULE | ||
| Pressure Specification | 58 psi +/- 5 psi | ||
| Fuel Pressure Test Procedure | *CHECKING THE FUEL DELIVERY SYSTEM | ||
| Fuel Pressure Release Procedure | FUEL SYSTEM PRESSURE RELEASE PROCEDURE | ||
| Ignition | |||
| Firing Order | |||
| 2.0L/2.4L | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| 2.7L | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| 3.5L | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Spark Plugs | SPARK PLUG | ||
| Starting | |||
| Starter | N/A | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel Alignment | |||
| Adjustment Specifications | WHEEL ALIGNMENT | ||
| Torque | Front FRONT SUSPENSION FASTENER TORQUE Rear REAR SUSPENSION FASTENER TORQUE |
||
| Wheel & Tire | |||
| Lug Nut Torque | 100 Ft. Lbs. (135 N.m) | ||