LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2007 >> Sebring Limited, 2.4 K >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection >> Inlet Air Temperature Sensor >> Removal >> Sensor-Inlet Air Temperature - 2.0/2.4L
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Sensor-Inlet Air Temperature - 2.0/2.4L

Fig 1: Identifying IAT Sensor Location
GC0055480Courtesy of CHRYSLER LLC

The sensor is located in the clean air duct.

  1. Disconnect the negative battery cable.
  2. Disconnect electrical connector from the sensor.
  3. Remove the sensor.
scientia non olet · About LEMON Manuals