Required Tools And Equipment
DRBIII® (diagnostic read-out box) scan tool Evaporative System Diagnostic Kit #6917 fuel filler adapter #8382 fuel pressure adapter (C-6631) or #6539 fuel pressure kit (C-4799-B) or #5069 fuel release hose (C-4799-1) Min Air flow fitting #6714 Pinout Box (Miller #8815) jumper wires ohmmeter oscilloscope vacuum gauge voltmeter
12 volt test light minimum 25 ohms resistance with probe #6801
CAUTION:
A 12 volt test light should not be used for the following circuits, damage to the powertrain controller will occur.
- 5 Volt Supply
- 8 Volt Supply
- J1850 PCI Bus
- CCD Bus
- CKP Sensor Signal
- CMP Sensor Signal
- Vehicle Speed Sensor Signal
- O2 Sensor Signal