LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2008 >> PT Cruiser L4-2.4L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair >> Powertrain Control Module - Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Powertrain Control Module - Installation







INSTALLATION





1. Install the PCM bracket and three mounting bolts (2) to the PCM and tighten to 11.8 Nm (105 in. lbs.).




2. Tip PCM and bracket assembly into bracket.




3. Locate the PCM and bracket assembly bracket on the tab (2).




4. Install the four mounting bolts to the PCM mounting bracket (1) and tighten to 10.7 Nm (95 in. lbs.).




5. Relocate and install the clutch reservoir.




NOTE: The electrical connector for the PCM are COLOR Coded.

6. Connect and lock the 3 or 4 electrical connectors (1) to the Powertrain Control Module (PCM).
7. Install plastic clips that hold the wiring harness to the support bracket.
8. Connect the negative battery cable.
scientia non olet · About LEMON Manuals