LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2008 >> Sebring Convertible L4-2.4L >> Repair and Diagnosis >> Body and Frame >> Frame >> Cross-Member >> Front Cross-Member >> Service and Repair >> Front Crossmember Fore/Aft >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation







INSTALLATION





1. Install the fore/aft cross-member and install the engine anti-roll mount (3) through bolt (1). Tighten to 50 Nm (37 ft.lbs.).




2. Install front bolts (1) and tighten to 55 Nm (40.5 ft. lbs.).




3. Install the rear bolts (1) and tighten to 55 Nm (41 ft. lbs.).
4. If equipped, install the belly pan.
scientia non olet · About LEMON Manuals