SERVO, Speed Control: Installation: Installation

Fig 1: Removing/Installing Cable Retaining Clip

Courtesy of CHRYSLER LLC

1 - HAIRPIN CLIP

1. Install the retaining clip holding cable to servo.
   Fig 2: Identifying Vacuum Line, Nipple, & Electrical Connector

   Courtesy of CHRYSLER LLC

   1 - Electrical Connector

   2 - Vacuum Line and Nipple

2. Install the vacuum line to the speed control servo.
3. Connect and lock the electrical connector to the speed control servo.
   Fig 3: Identifying Speed Control Servo Mounting Nuts

   Courtesy of CHRYSLER LLC
4. Install the speed control servo to the mounting bracket.
5. Install the 2 nuts from the speed control servo studs.
   Fig 4: Identifying Throttle Control Shield

   Courtesy of CHRYSLER LLC
6. Install the throttle control shield.
   Fig 5: Removing/Installing Negative Battery Cable

   Courtesy of CHRYSLER LLC
7. Connect the negative battery cable.