MODULE, Steering Column Control: Installation: Installation: Assembly

WARNING: This page is about a different car, the 2009 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Right Stalk Electrical Connector

Courtesy of CHRYSLER LLC

Connect the right stalk electrical connector.

Fig 2: Removing/Installing Right Multi-Function Switch Retaining Screw
Courtesy of CHRYSLER LLC
Slide the right stalk into the groove and install the one retaining screw.

Fig 3: Disconnecting/Connecting Left Stalk Electrical Connector
Courtesy of CHRYSLER LLC
Connect the left stalk switch electrical connector.

Fig 4: Removing/Installing Left Multi-Function Switch Stalk Retaining Screw
Courtesy of CHRYSLER LLC
Install the left stalk switch retaining screw.