Battery Reconnection: Notes

WARNING: This page is about a different car, the 2010 Dodge Avenger and 2010 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: This reconnection procedure is to be performed anytime the battery has been disconnected.

Connect the negative battery cable remote terminal to the remote battery post and tighten the nut.
CAUTION: Once the battery has been connected, review and perform the following information as applicable.

NOTE: The Electronic Stability Control (ESC) may also be referred to as Electronic Stability Program (ESP) depending on the vehicle model year and configuration. Certain components may also reference ESP, ESC, or use the traction control symbol