LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2009 >> Sebring Limited, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Electronic Control Modules (Service Information)) >> MODULE, Power Top Control >> Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

MODULE, Power Top Control: Installation: Installation

WARNING: This page is about a different car, the 2010 Dodge Avenger and 2010 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: PTCM Electrical Connectors
GC0120940Courtesy of CHRYSLER LLC
CAUTION: Replacement Power Top Control Module (PTCM) must be configured for the proper vehicle application. Failure to do so will result in improper top operation and possible component damage.
  1. Position the Power Top Control Module (PTCM) (4) onto the mounting studs of the lower left quarter panel (1).
  2. Install the two PTCM retaining nuts (2).
  3. Connect the PTCM electrical connectors (3).
  4. Install the left lower quarter trim panel. Refer to Body/Interior/PANEL, Quarter Trim - Installation .
  5. Connect the battery negative cable.
  6. Using an appropriate diagnostic scan tool, perform PTCM initial configuration for convertible soft top or retractable hard top application.
scientia non olet · About LEMON Manuals