Heater, Engine Block: Description: Description

Fig 1: 3.6L Engine Block Heater & Cylinder Block

Courtesy of CHRYSLER GROUP, LLC

The 3.6L engine block heater (1) is mounted in the cylinder block (2), near the front drivers side corner. The engine block heater (1) is a dry cylinder type design and is powered by 110 volt AC.

Fig 2: PIA Bolt, Engine Block Heater Element & PIA Bolt

Courtesy of CHRYSLER GROUP, LLC

The 5.7L engine block heater (1) is mounted in the cylinder block, near the left rear corner. The engine block heater (1) is a dry cylinder type design and is powered by 110 volt AC.