Module, Powertrain Control: Installation: Diesel

Fig 1: Nuts, PCM & Mounting Bracket

Courtesy of CHRYSLER GROUP, LLC

1. Install the Powertrain Control Module (PCM) (3) onto mounting bracket (1) and securely tighten the nuts (2).
   Fig 2: Crash Sensor Wire Harness Connector & Bolt

   Courtesy of CHRYSLER GROUP, LLC
2. Install the PCM with mounting bracket and securely tighten the bolt (2).
3. Install the crash sensor wire harness connector (1) to the inner fender.
   Fig 3: Powertrain Control Module (PCM) Connectors

   Courtesy of CHRYSLER GROUP, LLC
4. Connect the PCM wire harness connector (1).
   Fig 4: Removing/Installing Cowl Panel

   Courtesy of CHRYSLER GROUP, LLC
5. Install the strut support brace (6). Tighten bolts to 38 N.m (28 ft. lbs.).
6. Install the wiper arm linkage. Refer to LINKAGE, WIPER ARM, INSTALLATION .
   Fig 5: Engine Cover

   Courtesy of CHRYSLER GROUP, LLC
7. Install the engine cover (1).
8. Connect the negative battery cable.