Pedestrian Deployment
The following Electronic Pedestrian Protection (EPP) system components must be replaced following a pedestrian deployment:
- Right and left EPP hood hinge actuators
- Right and left active hood hinges
- Hood panel
The following components must be closely inspected, then replaced if any damage is visually evident following a pedestrian deployment:
- EPP impact sensors
- EPP impact sensor wiring
- Front bumper energy absorber foam material (inspect for compression, cracks and any other signs of deformation or deterioration)
- Front bumper support beam (reinforcement)
- Front fascia
- Front fascia brackets
- Hood latch/secondary catch unit
- Hood latch striker
- Pedestrian bar (see following NOTE )
NOTE:
The pedestrian bar MUST be inspected and replaced if visually damaged following ANY frontal vehicle impact, regardless of whether the active hood is deployed or how the impact occurred.