LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2014 >> 300 SRT-8 Core >> Repair and Diagnosis >> External Pages >> Different car >> Section 128 (Electronic Control Modules (Service Information)) >> Module, Adaptive Front Lighting System >> Removal >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Adaptive Front Lighting System: Removal: Removal

WARNING: This page is about a different car, the 2013 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the battery negative cable.
    Fig 1: AFLS Module, Blade-Type Mount & Wire Harness Connector
    GC0144879Courtesy of CHRYSLER GROUP, LLC
  2. Locate the Adaptive Front Lighting System (AFLS) module (1) at the right front corner of the Power Distribution Center (PDC) in the right front corner of the engine compartment.
  3. Release the AFLS module latch tab by pressing it toward the PDC.
  4. While holding the AFLS module latch tab in the released position, pull the module upward to disengage it from the blade-type mount (2) integral to the right front corner of the PDC bracket.
  5. Disconnect the headlamp and dash wire harness connector (3) from the AFLS module connector receptacle.
  6. Remove the AFLS module from the vehicle.
scientia non olet · About LEMON Manuals