LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2018 >> 300 C >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Keyless Ignition Node (Kin) >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Module, Keyless Ignition Node (Kin): Removal

GC0144691Courtesy of CHRYSLER GROUP, LLC
NOTE:

Mid ICS shown in the illustration, base similar.

  1. Disconnect the negative battery cable.
  2. Remove the instrument cluster center bezel (1). Refer to BEZEL, INSTRUMENT PANEL, CENTER, REMOVAL .
  3. Reach through the Integrated Center Stack (ICS) screen opening and disconnect the Keyless Ignition Node (KIN) electrical connector.
  4. Press on the three tabs (two on top and one on bottom) and push the KIN out the front of the instrument panel.
scientia non olet · About LEMON Manuals