LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2018 >> 300 C >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Electronic Control Modules (Service Information)) >> Module, Drivetrain Control (DTCM) >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Drivetrain Control (DTCM): Installation

WARNING: This page is about a different car, the 2018 Dodge Challenger. However, it is still accessible from the selected car via links, so may be relevant.
GC0095226Courtesy of CHRYSLER GROUP, LLC
  1. Slide the Drivetrain Control Module (DTCM) (3) on the mounting stud (6) and over mounting stud (5).
  2. Install the mounting nuts (2 and 4). Tighten the nuts to 16 N.m (12 ft. lbs.).
  3. Position the foot rest over the drivers floor. Connect wire harness connector.
    GC0184109Courtesy of CHRYSLER GROUP, LLC
  4. Slide foot rest (2) forward to engage top tab and let rear rest on floor, install nut (1) and tighten securely.
  5. Position the driver side carpet in place.
  6. Install the driver side floor cowl trim. Refer to PANEL, COWL TRIM, INSTALLATION .
scientia non olet · About LEMON Manuals