Module, Instrument Panel Cluster: Removal
WARNING: This page is about a different car, the 2018 Dodge Challenger. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the battery negative cable.
- Remove the instrument cluster bezel. Refer to BEZEL, INSTRUMENT CLUSTER, REMOVAL
.
- Remove the four (2) screws securing the instrument cluster (1) to the instrument panel.
- Tilt the cluster forward, and disconnect the electrical connector.
CLUSTER LENS AND MASK
- Remove the IPC.
- Working around the perimeter of the IPC, release the clips that secure the instrument cluster mask and lens unit to the housing.
- Remove the mask and lens.