Module, Radio Frequency (RF Hub): Installation
WARNING: This page is about a different car, the 2018 Dodge Challenger. However, it is still accessible from the selected car via links, so may be relevant.
- Position into place and install the Remote Frequency Hub Module (RFHM) and retainers (1).
- Connect the electrical connectors (2).
- If equipped, connect the remote start antenna (3).
- Install the rear shelf cover. Refer to PANEL, REAR SHELF, INSTALLATION .
- Connect the negative battery cable.
- Perform the RFHM programming procedure. This must be completed after a diagnostic repair. Refer to MODULE, RADIO FREQUENCY (RF HUB), MODULE PROGRAMMING .