LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> 300 Touring, RWD, Gas >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Cooling System >> Engine >> Heater, Engine Block >> Installation >> 5.7L/6.4L
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Heater, Engine Block: Installation: 5.7L/6.4L

GC0143810Courtesy of CHRYSLER GROUP, LLC
  1. Thoroughly clean the cylinder block core hole and the block heater seat.
  2. Insert the engine block heater (2). Tighten the engine block heater bolt (3) to the proper torque specification. Refer to TORQUE SPECIFICATIONS GAS .
  3. Install the belly pan. Refer to BELLY PAN, INSTALLATION .
  4. Remove support and lower the vehicle.
scientia non olet · About LEMON Manuals